NETUM NT-C06M Barcode Scanner Modules

NETUM NT-C06M Barcode Scanner Modules

NETUM NT-C06M barcode scanner modules is listed for wholesale enquiries through RuggedMaster. Communication Interface: USB, TTL-RS232, PS2 Multi-Interface.

Optical & Scanning Performance

Sensor Type : Linear CCD Sensor (2500 Pixels) Processor : ARM 32-bit High-Speed Processor Light Source : Red LED, Wavelength 620nm~630nm Scanning Precision : ≥3mil Ultra-High Precision Recognition Accuracy : ≥5mil/0.127mm @ PCS90% Depth of Field : 45mm – 700mm (Depends on barcode density) Scan Angle : Roll ±30°, Pitch ±60°, Skew ±60° Scanning Modes : Button Trigger, Continuous Illumination, Auto Detection, Command Control

Supported 1D Symbologies

EAN, UPC, Code 39, Code 128, Code 93, Codabar, Interleaved 2 of 5 and all mainstream commercial & industrial 1D barcodes

Interface & Electrical Parameters

Communication Interface : USB, TTL-RS232, PS2 Multi-Interface

Physical & Environmental Parameters

Durability : Dustproof & Pollution-Proof Sealed Design Operating Temperature : -20℃ ~ +50℃ Storage Temperature : -40℃ ~ +70℃

Industrial High-Precision Linear CCD Scanning Engine NETUM NT-C06M is a professional 1D CCD barcode scanner module developed for OEM embedded industrial and commercial scenarios. It adopts high-quality linear CCD sensor and built-in ARM 32-bit high-speed processor, matched with self-developed efficient decoding algorithms. It achieves ultra-high 3mil scanning precision and stably identifies tiny, dense and low-quality 1D barcodes, solving the decoding pain points of ordinary modules for fine industrial barcodes. Ultra-Wide Depth of Field & Flexible Scanning Modes This CCD scan module features an ultra-wide depth of field from 45mm to 700mm, covering short-distance dense codes and long-distance conventional barcode scanning scenarios. It supports four working modes: button trigger scanning, continuous lighting scanning, automatic sensing scanning and command-controlled scanning, which can freely switch according to equipment logic to meet fully automatic unmanned scanning requirements. Multi-Interface Compatibility for Easy OEM Development NT-C06M reserves USB, TTL-RS232 and PS2 triple mainstream industrial interfaces, with strong compatibility for various host devices, industrial control boards and self-service terminals. The integrated structural design effectively reduces equipment failure rate, simplifies secondary development procedures, shortens OEM project cycle and reduces customer integration costs. Industrial-Grade Environmental Adaptability Equipped with red LED light source (620nm~630nm wavelength) with strong light penetration and stable imaging quality. Adopting dustproof and pollution-proof sealing process, it supports wide operating temperature of -20℃ to 50℃, maintaining stable and consistent decoding performance in high-temperature, low-temperature, dusty and other complex workshop and commercial environments. Professional OEM 1D Barcode Core Solution With high precision, long depth of field, multi-mode switching and strong environmental adaptability, NT-C06M has become a preferred core scan engine for self-service equipment, logistics storage, smart retail and industrial OEM customization. It provides reliable and cost-effective 1D barcode identification solutions for global B-end equipment manufacturers.

Application Scenarios

Self-Service Kiosk & Terminal Equipment

Widely embedded in ATM machines, self-service inquiry terminals, queuing devices, lottery machines and unattended service equipment to realize automatic 1D barcode recognition and data collection.

Logistics & Smart Storage System

Ideal for logistics lockers, intelligent storage cabinets, wireless data collectors and warehousing sorting equipment, supporting long-distance and stable barcode scanning for parcel traceability.

Smart Retail & Commercial Equipment

Perfect for smart retail settlement equipment, offline cash registers and identification devices, efficiently decoding various commercial EAN/UPC retail barcodes.

Industrial OEM Embedded Integration

Serves as a professional OEM barcode scan engine, applicable to ID manufacturing equipment, automated identification machinery and various customized industrial scanning devices.

NETUM NT-C06M features and specifications

Sensor Type: Linear CCD Sensor (2500 Pixels) Processor : ARM 32-bit High-Speed Processor Light Source : Red LED, Wavelength 620nm~630nm Scanning Precision : ≥3mil Ultra-High Precision Recognition Accuracy : ≥5mil/0.127mm @ PCS90% Depth of Field : 45mm – 700mm (Depends on barcode density) Scan Angle : Roll ±30°, Pitch ±60°, Skew ±60° Scanning Modes : Button Trigger, Continuous Illumination, Auto Detection, Command Control.

Communication Interface: USB, TTL-RS232, PS2 Multi-Interface.

Durability: Dustproof & Pollution-Proof Sealed Design Operating Temperature : -20℃ ~ +50℃ Storage Temperature : -40℃ ~ +70℃.

NETUM NT-C06M bulk orders

For a NETUM NT-C06M wholesale enquiry, provide the model name, intended application, order quantity and destination. Compare the listed hardware and connections with your project requirements. The complete manufacturer specifications are available in the Specs tab. Keep the model number with your purchasing records so repeat enquiries refer to the same listing.

Check the software and peripheral requirements of your project before placing an enquiry. Review the operating system, processor, memory and available ports where these are listed. For scanning equipment, check the supported barcode types and interface. For portable equipment, review the screen, battery and wireless connections. Select the relevant specifications for your workflow.

Product photographs and manufacturer feature illustrations show the equipment and its intended applications. Equipment used in demonstration scenes may be separate from the listed product. Refer to the stated package contents and specifications when confirming the configuration. Ask about any required accessories by name so the enquiry identifies the complete setup for your business.

Compare the NETUM NT-C06M dimensions and operating conditions with the installation environment. For handheld devices, consider how staff will carry and use the equipment. For fixed equipment, check the mounting position, power connection and host system interface. Use the manufacturer values to make the comparison, and confirm any configuration options with your enquiry.

Explore RuggedMaster wholesale products.